Basic Safety Precautions 

Personnel working with envelope sealing machines must be aware of the risks involved and follow safe work practices.The following is a general list of safety precautions:

Should the Envelope Sealing Machine be used for any other purpose than the one for which is was intended, used incorrectly or subjected to bad repair or maintenance, no liability for any damages can be guaranteed!

Caution when on standby

The machine should be turned off when:

• Placing the water reservoir on the moistening tank
• Setting the guide plate and pile angle for size
• Replacing worn parts with new ones
• The machine is jammed (such as an envelope or belt track jam)

The Envelope Sealing Machine must not be used:

• In wet or damp areas.
• In temperatures below 10°C or over 50°C
• In areas containing highly flammable material
• In areas with explosive material
• In very dirty or dusty environments
• In corrosive environments (e.g. where the air has a high saltcontent) 

Safety instructions when the machine is on or in use:

• Do not carry out any manipulations
• Do not touch the conveyor belt
• Do not put your hands on the transport system and the sealer table
• Keep hands, long hair or dangling jewelery etc. away from the feed and moving parts.

Don’t forget, for safe and correct use, be sure to read the safety precautions in the related manual of the machine that you prefered.